Recommended Torque Values
| Torque | Further | |
|---|---|---|
| (Nm) | turn angle | |
| Intake bridge to intake flange | 20 | |
| Intake flange to cylinder head | 20 | |
| Exhaust manifold to cylinder head | 20 | |
| Torsional vibration damper to toothed belt drive gear | 20 | |
| Knock sensor to cylinder block | 20 | |
| Crankshaft bearing bridge to cylinder block | 50 | + 60 + 15 |
| Crankshaft bearing cover to cylinder block | 50 | + 60 + 15 |
| Camshaft bearing cover to cylinder head | 8 | |
| Camshaft gear to camshaft | 50 | + 60 + 15 4) |
| Oil pressure switch to oil pump | 40 | |
| Oil filter to cylinder block | 1 5 | |
| Oil pump to cylinder block | 6 | |
| Oil par to oil pan housing | 1 5 | |
| Intake plenum to intake bridge | 8 | |
| Toothed belt tension roller to bracket | 20 | |
| Toothed belt guide roller to toothed belt tension roller bracket | 40 | |
| Toothed belt guide roller to cylinder block | 40 | |
| Spark plug to cylinder head | 25 | |
| Cylinder head to cylinder block | 25 | + 270 1) + 152)3) |
1) In three stages of 90'
2) Use new bolts
3) No retightening required
4) Use new bolt