Recommended Torque Values
| Nm |
|---|
| Adapter for DIS ignition module to cylinder head | (M8) 20 (M10) 30 |
| Starter to transmission | 60 |
| Drive disc to crankshaft | 60 |
| Exhaust manifold to cylinder head | 22 |
| DIS ignition module to adapter | 8 |
| Torque support to bracket | 60 |
| Torsional vibration damper to toothed belt drive gear | 20 |
| Intake manifold to cylinder head | 22 |
| Crankshaft pulse pick-up sensor disc to crankshaft | 13 |
Recommended Torque Values
| Nm |
|---|
| Alternator with bracket to cylinder block | 35 |
| Ancillary component bracket to cylinder block | 35 |
| Bowden cable bracket and fuel feed line to fuel distributor pipe | 15 |
| Torque support bracket to adapter | 60 |
| Accelerator pedal bracket to bulkhead | 20 |
| Tank vent vacuum hose bracket to intake manifold | 20 |
| Rear toothed belt cover to oil pump and cylinder head | 6 |
| Refrigerant line to compressor | 33 |
| Ribbed V-belt tension roller to ancillary component main bracket | 25 |
| Clamp for shift guide | 16 |
Recommended Torque Values
| Nm |
|---|
| Clamp bolt for steering column intermediate shaft | 22 + 45� + 15� |
| Knock sensor to cylinder block | 20 |
| Fuel lines to fuel distributor pipe | 15 |
| Fuel return line to fuel pressure regulator | 15 |
| Coolant pump to cylinder block | 25 |
| Crankshaft bearing bridge to cylinder block | 20 |
| Crankshaft bearing cap to cylinder block | 50 + 45�+ 15� |
| Bearing flange to transmission | 25 |
| Oxygen sensor in front exhaust pipe | 55 |
| Alternator shackle to alternator and intake manifold | 20 |
Recommended Torque Values
| Nm |
|---|
| Engine damping block front to engine damping block bracket | 45 |
| Rear engine damping block to engine damping block bracket | 45 |
| Rear engine damping block to front axle body | 20 |
| Bracket, guide rollers to cylinder block | 25 |
| Bracket, engine damping block, rear to transmission | 60 |
| Engine damping block, front to front axle body | 45 |
| Camshaft bearing cover to cylinder head | 8 |
| Camshaft sprocket to camshaft | 50 + 60�+ 15� |
| Camshaft sensor to cylinder head | 6 |
Recommended Torque Values
| Nm |
|---|
| Oil drain bolt to lower part of oil pan | 10 |
| Oil pressure switch to oil pump | 40 |
| Oil filter to oil pump | 15 |
| Oil pump to cylinder block | 6 |
| Oil pump cover to oil pump | 6 |
| Oil intake pipe to crankshaft bearing bridge | 20 |
| Oil intake pipe to oil pump | 8 |
| Oil baffle plate to crankshaft bearing bridge | 20 |
| Upper part of oil pan to transmission | (M8) 20 (M10) 40 |
Recommended Torque Values
| Nm |
|---|
| Upper part of oil pan to cylinder block | 20 |
| Lower part of oil pan to upper part of oil pan | 8 + 30� |
| Lower part of oil pan to cylinder block | 15 |
| Arm to spring strut support tube | 65 |
| Con-rod bearing cap to con-rod | 35 + 45�+ 15� |
| Power steering pump to auxiliary aggregates support | 25 |
| Clamp to fuel pressure regulator | 5 |
| Flywheel to crankshaft | 65 + 30�+ 15� |
Recommended Torque Values
| Nm |
|---|
| Coolant temperature sensor to coolant flange | 10 |
| Intake manifold support to intake manifold and cylinder block | 25 |
| Alternator support to alternator and intake manifold | 20 |
| Throttle valve port to intake manifold | 9 |
| Thermostat housing to cylinder head | 15 |
| Safety valve to oil pump | 30 |
| Vacuum line, brake servo to intake manifold | 20 |
| Compressor to auxiliary aggregates support | 35 |
| Front axle body to chassis | 100 + 45�+ 15� |
| Front toothed belt cover to rear toothed belt cover | 6 |
| Front exhaust pipe to exhaust manifold | 20 |
Recommended Torque Values
| Nm |
|---|
| Toothed belt drive gear to crankshaft | 130 + 40� up to 50� |
| Toothed belt tension roller to oil pump | 20 |
| Toothed belt guide roller to guide roller bracket | 25 |
| Toothed belt guide roller to cylinder block | 25 |
| Ignition cable cover to cylinder head cover | 3 |
| Spark plug to cylinder head | 25 |
| Cylinder head to cylinder block | 25 + 90�+ 90�+ 90� + 15� |
| Cylinder head cover to cylinder head | 8 |
