Remove
- 1. Open bonnet
- 2. Disconnect battery • Detach ground connection from ground terminal – Slacken nut
- 3. Raise vehicle by its full height
- 4. Detach the lower engine cover and right engine splash guard
- 5. Place collecting basin underneath.
- 6. Detach turbocharger oil return line • Unscrew 4x bolts (arrows)
Install
- 7. Install turbocharger oil return line • Replace 2x seals • Attach to turbocharger – Tighten 2x bolt 9 Nm • Attach to cylinder block – Tighten 2x bolt 25 Nm
- 8. Install lower engine cover and right engine splash guard
- 9. Lower vehicle by its full height
- 10. Connect battery • Attach ground connection to ground terminal – Tighten nut
- 11. Program volatile memories
- 12. Close bonnet