Remove
- 1. Open bonnet
- 2. Disconnect battery • Detach ground connection from ground terminal – Slacken nut
- 3. Raise vehicle
- 4. Detach the lower engine cover and right engine splash guard
- 5. Remove oil pressure switch (2) • Place collecting basin underneath. • Disconnect wiring harness plug (1)
Install
- 6. Install oil pressure switch • Tighten oil pressure switch 25 Nm • Replace sealing ring • Fix wiring harness plug
- 7. Install lower engine cover and right engine splash guard
- 8. Lower vehicle
- 9. Connect battery • Attach ground connection to ground terminal – Tighten nut
- 10. Program volatile memories
- 11. Check engine oil level, correct if necessary • Observe specified engine oil quantity
- 12. Close bonnet