Remove
- 1. Open bonnet
- 2. Disconnect battery • Detach earth connection from earth terminal – Slacken nut
- 3. Raise vehicle by its full height
- 4. Detach the lower engine cover and right engine splash guard
- 5. Remove engine damper block (1) • Detach from transmission – Unscrew 2x bolts • Detach from front axle body – Remove bolted connection
Install
- 6. Install engine damper block • Attach to transmission – Tighten 2x bolt 80 Nm • Attach to front axle body – Tighten screwed joint 55 Nm
- 7. Install lower engine cover and right engine splash guard
- 8. Lower vehicle by its full height
- 9. Connect battery • Attach earth connection to earth terminal – Tighten nut
- 10. Program volatile memories
- 11. Close bonnet