Contents Wiring diagrams Section: Cooling System (mechanical) All sections

Oil Level, Checking Audi TT 8N

Cooling System (mechanical) 1 illustration ~142 words
  1. Engine oil temperature at least 60° C
  2. Vehicle must be level (horizontal)
  3. Wait a few minutes after switching off the engine to allow the oil to flow back into the sump

Work sequence

  1. Pull out oil dipstick, wipe off with a clean cloth and insert again as far as it will go.
  2. Pull out dipstick again and read oil level.

Scheme 203

Scheme 203

Markings on oil dipstick

a - Do not top up oil

b - Oil may be topped up. Oil level may rise as far as area -a- after topping up.

c - Oil must be topped up. It is sufficient if the oil level is somewhere in area -b- (grooved area on dipstick) after topping up.

Note. The oil level must not be above the MAX marking (arrow -1-) and not below the MIN marking (arrow -2-).