Center and Rear Muffler, Separating Audi TT 8N

1. A separating point has been provided in the separating pipe for individual replacement of the center or rear muffler.
2. Separating point is marked by a depression around the circumference of the exhaust pipe.

Special tools and equipment

Scheme 235

1. Cutting chain VAS 6524
2. Protective glasses

Work sequence

Scheme 236

1. Using VAS 6524, cut exhaust pipe at separating point (arrow) at right angle.

Scheme 237

1. When installing, center clamp -1- on separation point.

1. Install clamp so that bolt ends do not protrude beyond bottom of clamp.

Bolt connection faces to left

1. Align exhaust system free of stress. Refer to «Exhaust system, aligning free of stress»(ref-276269-S03604659422008010300000) .
2. Tighten bolts on clamp evenly to 40 Nm.