Home/Audi/A4/Audi A4 B6 (2000-2006)/Repair manual/Mechanical/Engine, Removing and Installing
Contents Wiring diagrams Section: Mechanical All sections

Engine, Removing and Installing Audi A4 B6

Mechanical 3 illustrations
CAUTIONBefore beginning repairs on the electrical system: Obtain the anti-theft radio security code. Switch the ignition off. Disconnect the battery Ground (GND) strap. On vehicles equipped with Audi Telematics by OnStar®R, switch-off the emergency (back-up) battery for the Telematic/Telephone Control Module prior to disconnecting vehicle battery. See EMERGENCY BATTERY, SWITCHING OFF/ON . After reconnecting vehicle battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows according to Repair Manual and/or Owner's Manual. After reconnecting vehicle battery on vehicles equipped with Audi Telematics by OnStar®R, switch-on the emergency (back-up) battery for the Telematic/Telephone Control Module See EMERGENCY BATTERY, SWITCHING OFF/ON .

Scheme 7

Scheme 7: Special tools and equipment

Scheme 8

Scheme 8

Scheme 9

Scheme 9
  1. 10-222A Engine support bridge
  2. 2024A Engine Sling
  3. 3147 engine support adapter
  4. 3299 ribbed belt installation tool with 3299/1 claw for tensioner
  5. VAG1306 drip tray for VAG1202A
  6. Engine/transmission hoist
  7. VAG1202A workshop crane or
  8. VAS6100
  9. T10062 support
  10. Oil receptacle