Contents Wiring diagrams Section: Mechanical All sections

Test Requirements Audi A4 B6

Mechanical 1 illustration ~110 words
  1. Minimum engine oil temperature: 60 °C
  2. Vehicle on level ground.
  3. After stopping engine, wait a few minutes to allow oil to flow back into oil pan.
  1. Pull out oil dipstick, wipe off with a clean cloth and re-insert dipstick again up to stop.
  2. Withdraw dipstick again and read oil level.

Range of markings on dipstick

Scheme 428

Scheme 428
  1. Oil must not be topped off.
  2. Oil may be topped off. After topping off, oil may reach range -a.
  3. Oil must be topped off. After topping off, it is sufficient if oil level is somewhere in range -b- (shaded area).

Note. Oil level must not exceed mark -a- on oil dipstick.