Engine Torque
The signal displays the calculated output torque of the engine.
Measurement range: -512 - +511 Nm
511 = No torque limiting request
Torque Control
Torque reduction occurs through control of the ignition and is used to lower the engine torque while shifting for smoother gearshifts and longer service life. Torque reduction is activated at the same time that shifting starts.
Measurement range: 0 - 511 Nm
Torque Limiting Requested
The signal displays torque limiting and is used to limit the torque of the engine continuously in those cases where the maximum permitted torque limit of the gearbox would otherwise have been exceeded. To reach the desired reduction level the engine control module (ECM) uses a mixture of ignition reduction and throttle control.
Measurement range: -512 - +511 Nm
511 = No torque limiting request
The value indicates the engine torque. The value is given in Nm.
The value indicates the engine torque. The value is given in Nm.
The value indicates current engine torque. The Transmission Control Module (TCM) obtains the value from the Engine Control Module (ECM) via CAN.
Measurement range: -512 - +511 Nm.
Calculated Torque To Transmission
The value indicates engine torque that the Transmission Control Module (TCM) calculates the transmission obtains from the engine.
Measurement range: -512 - +511 Nm.