Home/Volvo/S60/Volvo S60 I (2000-2004)/Repair manual/Gearbox, Gear Shift Position Sensor - Adjustment, Removal & Installation
Manual sections Wiring diagrams
Repair manual

Gearbox, Gear Shift Position Sensor - Adjustment, Removal & Installation Volvo S60 I

Step-by-step instructions on "Gearbox, Gear Shift Position Sensor - Adjustment, Removal & Installation" for Volvo S60 I (2000–2004). Pick an article — removal, installation, adjustment and diagnostics with illustrations.

52subsections
52articles
107illustrations

Gear selector cables, adjusting

1 article

Preparatory work

1 article

Preparations and adjusting gear selector cable

1 article

Installing components

1 article

Gearbox input speed sensor, replacing

1 article

Gearbox, installing

1 article

Gearbox, removing (D5252 M56 2000-)

1 article

Disconnecting the battery lead

1 article

Removing the mounting screws for the gearbox and starter motor

1 article

Removing the air baffle and splash guard under the engine

1 article

Removing the control arms and track rod (both sides)

1 article

Removing the nut from the ball joint (both sides)

1 article

Removing the screws from the sub-frame support plates (both sides)

1 article

Removing the stub axle from the control arm

1 article

Removing the drive shaft from the stub axle (right-hand side)

1 article

Removing the sealing ring for the CV joint housing

1 article

Removing the cap for the drive shaft support bearing

1 article

Removing the drive shaft

1 article

Pressing up the sub-frame on the right-hand side

1 article

Preparatory work for removing the stub axle on the left-hand side

1 article

Lowering the sub-frame

1 article

Lowering the engine and gearbox

1 article

Removing the collision protection system over the steering gear

1 article

Installing the fixture on the mobile jack

1 article

Gearbox, removing (AW50/51 AWD; AW55-50/51SN; 2003-2009)

1 article

Removing the coolant hose from the passenger compartment heater

1 article

Gearbox, removing (B5254T4, M66 AWD; 2004-2007)

1 article

Preparations when removing gearbox

1 article

Preparations for lowering the sub-frame

1 article

Gearbox, removing (gasoline M66 AWD 2004-)

1 article

Removing the screws and nuts for the engine pad, engine stabilizer brace and steering gear

1 article

Measuring position of the tie rod in steering gear

1 article

Disconnecting the steering gear

1 article

Removing front suspension components (both sides)

1 article

Disconnecting the ball joint pinion from the control arm (both sides)

1 article

Removing the right drive shaft

1 article

Removing the drive shaft from the gearbox

1 article

Removing the lower charge air pipe

1 article

Removing bevel gear

1 article

Installing the fixture on the mobile jack and gearbox

1 article

Removing the gearbox

1 article

Gearbox, removing (AW50/51 AWD; 2002-2009)

1 article

Gearbox, removing (B5204T5, M56; 2004-2007)

1 article

Installing the lifting beam and lifting hook on the engine lifting eyelet

1 article

Removing the air baffles and splash guard under the engine

1 article

Removing the screw for the cable duct

1 article

Measuring the position of the tie rod in the steering gear

1 article

Exposing the steering shaft joint

1 article

Gear-shift position sensor, checking/adjusting (AW50/51 AWD; AW55-50/51SN; 2003-2009)

1 article

Gear-shift position sensor, checking/adjusting (AW50/51 AWD; 2002)

1 article

Installing the gear selector cable

1 article

Installing engine compartment components

1 article