Installation
Note. For tightening torques, see Tightening Torque .
Note. For tightening torques, see Tightening Torque .
| CAUTION | Ensure that the cable harness is not trapped when the control system is positioned. |
Scheme 1366
Lightly tighten.
Use new screws and a new gasket.
Lightly tighten.
Scheme 1367
Tighten alternately, M6.
Removal
Connector A
Press in the catch on the large connector A. Pull the metal striker plate upwards.
Connector B
Press in the catch on the gray connector B (located next to connector A). Pull the connector straight out.