Table 2, Multec (X 12 SZ / X 16 SZ) F2: TROUBLE CODE
Trouble
| Code | Information Sensor |
|---|---|
| Cause of Fault | Remedy in F0: |
| DATA LIST | Trouble Code Storage when... |
| 81 | INJECTOR VALVE |
VOLTAGE HIGH
| 33 | · The control unit has determined a voltage level at the outputs to the injectors which does not correspond to the nominal value (5 consecutive 12 V to 0 V transitions were not registered) |
· Short circuit to battery voltage or circuit interruption
· The fault is recognized immediately after the engine is started.
If trouble code 81 was recognized, the injector is no longer actuated.