Home/Opel/Vectra/Opel Vectra A (1989-1995)/Repair manual/Fuel Injection Systems/F0: Data List - Test Step 12 O2 Blm Enable
Contents Section: Fuel Injection Systems All sections

F0: Data List - Test Step 12 O2 Blm Enable Opel Vectra A

TestTECH 1NotesNominal ValuesPossible
StepDisplayTrouble
No.Codes
12 *O2 BLM ENABLEIgnition ONINACTIVE
Engine at idle speed at 1500 rpm13, 44, 45,
(adjusted via TECH 1 mode "F7", sub-mode "F0")ACTIVE35
and is at operating temperature

Trouble-shooting: Nominal Value: Cause of Fault:

(If nominal values are not attained)

If all other checking values of the F0:DATA LIST lie within the given tolerances, the vehicle performs perfectly and the customer has no further complaints, do not carry out any further measures.

Otherwise, replace the control unit.

* Throttle valve must be closed.

Coolant temperature > 80°C/176°F