MULTEC Central Fuel Injection (X 12 SZ / X 16 SZ) F2:TROUBLE CODE TABLE
Trouble
| Code |
Information Sensor
| Cause of Fault | Remedy in |
F0:DATA LIST
| No. | ||
|---|---|---|
| Trouble Code Storage when ... | ||
| Remarks | ||
| 35 | IDLE AIR CONTROL | |
| 08 | · Engine running at idle speed |
· Vehicle speed less than 1 km/h (0.6 mph)
· Coolant temperature higher than 80 °C/176 °F
· Throttle valve aperture less than 2 %
· Following trouble codes not stored: 21, 22, 24
· Nominal idle speed is not maintained; deviation is greater than 150 rpm
· The above conditions must be fulfilled for at least 20 s
If the speed sensor has malfunctioned and trouble code 24 has not yet been recognized, trouble code 35 may be set under certain circumstances.