Table 2, Multec (X 12 SZ / X 16 SZ) F2: TROUBLE CODE
Trouble
| Code | Information Sensor | ||
|---|---|---|---|
| Cause of Fault | Remedy in F0: | ||
| DATA LIST | Trouble Code Storage when... | ||
| 25 | INJECTOR VALVE VOLTAGE LOW | 33 | · The control unit has determined a voltage level at the ·output to the injector which does not correspond to the nominal value (32 consecutive 0 V to 12 V transitions were not registered) |
The fault (lead interruption / short circuit to ground) is recognized when the ignition is switched on and the switchon test is performed, and also while travelling.
Short circuit to ground:
The injector is always actuated
The engine does not start
The catalytic converter may become damaged
Interruption:
The injector is no longer actuated.