Simtec 56.0/ 56.1 F2:TROUBLE CODE TABLE
| Trouble Code | Information Sensor Cause of Fault | Remedy in F0:DATA LIST No. | Trouble Code Storage when ... |
|---|---|---|---|
| 14 | COOLANT TEMP. VOLTAGE LOW | 08 | · Coolant temperature higher than 140 °C/ 284 °F (short circuit to ground) |
· Condition must be fulfilled for at least 1 s
Replacement values:
· With ignition ON and trouble codes 69 and 71 not recognised, the intake air temperature is taken as the starting value
· With ignition ON and trouble code 69 or 71 recognised, 10 °C/ 50 °F is taken as the starting value
· If a plausible measured value has already been produced for the coolant temperature, this value is taken as the starting value
· The starting value is increased by 1 °C/ 1.8 °F every 146 cycles (1 cycle = 720 °CA) up to a maximum value of 99 °C/ 210 °F
This value is used for the remaining engine operation.
Effects:
· All adaptation except knock control, throttle valve regulation and idle speed adjuster regulation is blocked
| · Tank vent valve regulation is blocked and the tank vent valve is closed |