MULTEC Central Fuel Injection (X 12 SZ / X 16 SZ) F2:TROUBLE CODE TABLE
Trouble
| Code |
Information Sensor
| Cause of Fault | Remedy in |
F0:DATA LIST
| No. | |||
|---|---|---|---|
| Trouble Code Storage when ... | |||
| Remarks | |||
| 81 | INJECTOR VALVE VOLTAGE HIGH | 33 | · The control unit has determined a voltage level at the outputs to the injectors which does not correspond to the nominal value (5 consecutive 12 V to 0 V transitions were not registered) |
· Short circuit to battery voltage or circuit interruption
· The fault is recognized immediately after the engine is started.
If trouble code 81 was recognized, the injector is no longer actuated.