MULTEC Central Fuel Injection (X 12 SZ / X 16 SZ) F2:TROUBLE CODE TABLE
Trouble
| Code |
Information Sensor
| Cause of Fault | Remedy in |
F0:DATA LIST
| No. | |
|---|---|
| Trouble Code Storage when ... | |
| Remarks | |
| 33 | MAP SENSOR |
VOLTAGE HIGH
| 03 | · Engine running at idle speed |
· Throttle valve aperture less than 19 %
· Following trouble codes not stored: 21, 22
· Intake manifold absolute pressure greater than 930 hPa
The above conditions must be fulfilled for at least 2 s
If trouble code 33 was recognized, the system calculates with the following replacement functions:
Engine not running:
Intake manifold pressure equals 900 hPa
Engine running:
The control unit calculates the intake manifold pressure depending on the engine speed and throttle valve position.