Table 2, Multec (X 12 SZ / X 16 SZ) F2: TROUBLE CODE
Trouble
| Code | Information Sensor | ||
|---|---|---|---|
| Cause of Fault | Remedy in F0: | ||
| DATA LIST | Trouble Code Storage when... | ||
| 34 | MAP SENSOR VOLTAGE LOW | 03 | · Engine speed higher than 1050 rpm |
· Following trouble codes not stored: 21
· Throttle valve aperture greater than 18.8 %
· Intake manifold absolute pressure less than 140 hPa
· The above conditions must be fulfilled for at least 0.06 s
· Engine speed lower than 1050 rpm
· Following trouble codes not stored: 21
· Intake manifold absolute pressure less than 140 hPa
· The above conditions must be fulfilled for at least 0.06 s
If trouble code 34 was recognized, the system calculates with the following replacement functions:
Engine not running:
Intake manifold pressure equals 900 hPa
Engine running:
The control unit calculates the intake manifold pressure depending on the engine speed and throttle valve position.