MULTEC Central Fuel Injection (X 12 SZ / X 16 SZ) F2:TROUBLE CODE TABLE
Trouble
| Code |
Information Sensor
| Cause of Fault | Remedy in |
F0:DATA LIST
| No. | ||
|---|---|---|
| Trouble Code Storage when ... | ||
| Remarks | ||
| 25 | INJECTOR VALVE VOLTAGE LOW | |
| 33 | · The control unit has determined a voltage level at the output to the injector which does not correspond to the nominal value (32 consecutive 0 V to 12 V transitions were not registered) |
The fault (lead interruption/short circuit to ground) is recognized when the ignition is switched on and the switch-on test is performed, and also while travelling.
Short circuit to ground:
The injector is always actuated
The engine does not start
The catalytic converter may become damaged
Interruption:
The injector is no longer actuated.