MULTEC Central Fuel Injection (X 12 SZ / X 16 SZ) F2:TROUBLE CODE TABLE
Trouble
| Code |
Information Sensor
| Cause of Fault | Remedy in |
F0:DATA LIST
| No. | |
|---|---|
| Trouble Code Storage when ... | |
| Remarks | |
| 15 | COOLANT TEMP. |
VOLTAGE HIGH
| 02 | · Engine running for at least 2 s |
· Coolant temperature lower than - 35 °C/ - 31 °F (short circuit to battery voltage)
If trouble code 14 was recognized, the control unit takes following replacement values for the coolant temperature:
10 °C to 85 °C/50 °F to 185 °F, depending on the time since engine start.