Replace Crankshaft Pulse Generator Opel Astra H

Remove

1. 1. Open bonnet
2. 2. Disconnect battery • Detach earth cable – Slacken nut
3. 3. Raise vehicle by its full height
4. 4. Release and disconnect wiring harness plug of dynamic oil level check (1)
5. 5. Detach starter wiring harness • Unscrew 2x nut (arrows) • Undo cable tie

6. 6. Remove starter • Detach wiring harness plug of crankshaft pulse pick-up • Unscrew 2x bolts (1)

7. 7. Remove crankshaft pulse pickup (1) • Unscrew bolt

Install

8. 8. Install crankshaft pulse pick-up • Replace sealing ring • Tighten bolt 9 Nm
9. 9. Fit starter • Tighten 2x bolt 40 Nm • Connect and lock wiring harness plug of crankshaft pulse pick-up
10. 10. Attach starter wiring harness • Tighten 2x nuts • Attach cable ties
11. 11. Connect and lock wiring harness plug of dynamic oil level check
12. 12. Lower vehicle completely
13. 13. Connect battery • Attach earth connection – Tighten nut
14. 14. Program volatile memories
15. 15. Close bonnet