Contents Wiring diagrams Section: Fuel Injection Systems All sections

Replace Mixture Regulator Oxygen Sensor Opel Astra H

Fuel Injection Systems 2 illustrations

Remove

  1. 1. Open bonnet
  2. 2. Remove upper engine cover
  3. 3. Release and disconnect wiring harness plug for mixture regulator oxygen sensor (1)
  1. 4. Raise vehicle by its full height
  2. 5. Remove mixture regulator oxygen sensor (2)

Install

  1. 6. Tighten mixture regulator oxygen sensor 40 Nm

Note. Coat thread with special grease

  1. 7. Connect and lock oxygen sensor wiring harness plug, mixture regulation
  2. 8. Install upper engine cover
  3. 9. Close bonnet