Remove
- 1. Open bonnet
- 2. Detach 2x engine vent hose • Undo 2 clamps
- 3. Remove cover of injectors (1) • Unclip wiring harness bracket • Unclip coolant hose from bracket • Unscrew 2x bolts
- 4. Remove Twinport sensor (2) • Disconnect wiring harness plug, injector of cylinder 3 • Disconnect wiring harness plug, Twinport sensor (3) • Unscrew bolt
Install
- 5. Install Twinport sensor • Tighten bolt • Connect wiring harness plug, injector of cylinder 3 • Connect wiring harness plug, Twinport sensor
Note. Note locating pins
- 6. Install cover - injectors • Tighten 2x bolts • Clip in wiring harness cover • Clip coolant hose into bracket
- 7. Attach 2x engine vent hose to cylinder head bolt • Attach 2x clamps
- 8. Close bonnet