Remove
- 1. Remove lower part of oil pan
- 2. Remove residual oil quantity sensor • Disconnect wiring harness plug (4) • Release retaining clamp (3) • Unscrew 3x bolts (1 and 2)
- 3. Detach residual oil quantity sensor from retaining plate • Unscrew 2x nuts
Install
- 4. Attach residual oil quantity sensor to retaining plate • Tighten 2x nuts 8 Nm
- 5. Install residual oil quantity sensor • Fix wiring harness plug • Clamp retaining clip • Tighten 3x bolt 24 Nm
- 6. Install lower part of oil pan