Remove
- 1. Open bonnet
- 2. Disconnect battery • Slacken nut
- 3. Raise vehicle by its full height
- 4. Remove solenoid valve, change-over valve (2) • Detach 2x vacuum hoses (3) • Disconnect wiring harness plug (1) • Unclip from intake manifold
Note. Unlatch lock
Install
- 5. Install solenoid valve, change-over valve • Clip on to intake manifold • Attach 2x vacuum hoses • Fix wiring harness plug
- 6. Lower vehicle by its full height
- 7. Connect battery • Tighten nut
- 8. Program volatile memories
- 9. Close bonnet