Rocker Arm Replace Opel Antara I

Rocker Arm Replace

Remove

1. Remove the camshafts from the appropriate cylinder head. Refer to Camshaft Replace .

Important: If the rocker arms are being reused, they must be reinstalled in their original location.

Note: Record the rocker arm positions during removal.

2. Remove the rocker arm (1) from the cylinder head (2).

Inspect

1. Inspect the rocker arm roller (1) for the following:
2. Replace the rocker arm as required.

Install

1. Apply a liberal amount of commercially available camshaft / lifter prelube or equivalent to the pivot pocket (1), roller (2) and valve slot (3) areas of the camshaft followers.

Note :

1. Place the rocker arm in position on the valve tip and stationary hydraulic lash adjuster (SHLA). The rounded head end of the arm seats on the SHLA while the flat end seats on the valve tip.
2. Clean the camshaft journals and carriers with a clean, lint-free cloth.
3. Reinstall the camshafts. Refer to Camshaft Replace .