Engine Oil Pressure Sensor Replace Opel Antara I

Engine Oil Pressure Sensor Replace

Remove

Warning: To avoid personal injury, take care when removing the engine oil pressure sensor when the engine is hot. Allow the engine to cool before performing this procedure.

1. Disconnect the negative battery cable.
2. Remove the engine dress cover. Refer to Engine Dress Cover Replace .
3. Drain the engine oil by removing the engine oil drain plug.
4. Disconnect the wiring harness connector from the engine oil pressure sensor.

Note: Clean the area around the engine oil pressure sensor before removal to avoid debris from entering the engine.

5. Remove the engine oil pressure sensor.

Install

1. Install the oil pressure sensor.

Tighten

Tighten the engine oil pressure sensor to 13 N•m (115 lb-in).

2. Connect the engine oil pressure sensor connector.