Cylinder Head Cover Replace Opel Antara I



Cylinder Head Cover Replace

Remove

1. Disconnect the negative battery cable.
2. Remove the engine beautification cover bolts and nuts.
3. Remove the engine beautification cover.
4. Disconnect the breather hose and PCV hose from the cylinder head cover.

5. Disconnect the ignition wires from the spark plugs.
6. Disconnect the camshaft position sensor connector.
7. Remove the cylinder head cover bolts.

8. Remove the cylinder head cover.
9. Remove the cylinder head cover gasket from the cylinder head cover.

Install

1. Apply a small amount of gasket sealant to the corners of the front camshaft caps and the top of the rear cylinder head cover-to-cylinder head seal.
2. Install the new cylinder head cover gasket to the cylinder head cover.

3. Install the cylinder head cover.
4. Install the cylinder head cover bolts.

Tighten

Tighten the cylinder head cover bolts to 8 N•m (71 lb-in.).

5. Connect the ignition wires to the spark plugs.

6. Connect the camshaft position sensor connector.
7. Connect the breather hose and PCV hose to the cylinder head cover.
8. Install the engine beautification cover.

Tighten

Tighten the engine beautification cover bolts and nuts to 8 N•m (71 lb-in.).

9. Connect the negative battery cable.