Vacuum Pump Replace Opel Antara I

Vacuum Pump Replace

Remove

1. Disconnect the negative battery cable.
2. Remove the beauty cover. Refer to Beauty Cover Replace .
3. Remove the junction block bolts. Refer to Fuel Return Line Assembly Replace .
4. Remove the beauty cover bracket.

5. Remove the engine wiring harness bracket.
6. Disconnect the EGR and brake booster vacuum hoses.

7. Remove the vacuum pump.

Install

1. Install the vacuum pump.

Tighten

Tighten the vacuum pump tightening bolts to 12 N•m (8.9 lb-ft).

2. Install the engine wiring harness bracket.
3. Connect the EGR and brake booster vacuum hoses.

Tighten

Tighten the engine wiring harness bracket nuts to 20 N•m (14.8 lb-ft).

4. Install the beauty cover bracket.

Tighten

Tighten the beauty cover bracket bolts to 11 N•m (97.4 lb-in).