Home ReviewsRefund
Home/Opel/Antara/Opel Antara I (2007-2011)/Repair manual/Diesel Engine/Oil Pressure Switch Replace
Contents Wiring diagrams Section: Diesel Engine All sections

Oil Pressure Switch Replace Opel Antara I

Diesel Engine 1 illustration



Oil Pressure Switch Replace

Removal/Installation Procedure

  1. Disconnect the negative battery cable.
  2. Drain the engine oil.
  3. Disconnect the oil pressure switch connector.
  4. Remove the oil pressure switch.

Tighten

Tighten the oil pressure switch to 30 N•m (22.1 lb-ft).

More articles — Engine and Engine Aggregates