Glow Plug Replace Opel Antara I

Glow Plug Replace

Remove

Caution: Make sure to confirm that the components are cool.

1. Disconnect the negative battery cable.
2. Remove beauty cover. Refer to Beauty Cover Replace .
3. Remove the charge air system hoses and ducts. Refer to Charging Air System Replace .

4. Remove the PCV valve and adapter. Refer to PCV Valve and Adapter Replace .
5. Remove the glow plug heat shield.

6. Disconnect the glow plug wiring harness.

7. Remove the glow plug.

Note: T o remove the No.3 and No.4 glow plugs, remove the turbocharger beforehand.

Install

1. Install the glow plug.

Tighten

Tighten the glow plug to 9 N•m (79.7 lb-in).

2. Install the glow plug heat shield.

Tighten

Tighten the glow plug heat shield bolt to 20 N•m (14.8 lb-ft).

Tighten the glow plug heat shield nut (engine lift bracket retaining nut) to 28 N•m (20.6 lb-ft).