Home ReviewsRefund
Home/Opel/Antara/Opel Antara I (2007-2011)/Repair manual/Diesel Engine/Transmission Front Mount Assembly Replace
Contents Wiring diagrams Section: Diesel Engine All sections

Transmission Front Mount Assembly Replace Opel Antara I

Diesel Engine 3 illustrations ~146 words

Transmission Front Mount Assembly Replace

Tools Required

DW110–060 Engine Assembly Support Fixture

Remove

Important: Only lift the engine far enough to take the weight off the transmission front mount assembly, or damage to the mount and lifting equipment failure may occur.

  1. Support the engine assembly using the engine assembly support fixture DW110–060.
  1. Remove the transmission front mount–to–transmission through bolt.
  2. Remove the transmission front mount retaining bolts from the transmission.
  3. Remove the transmission front mount assembly.

Install

  1. Install the transmission front mount assembly.

Tighten

Tighten the transmission front mount retaining bolts to 50 N•m (36.9 lb–ft).

Note: Before tightening the transmission front mount through bolt swing the engine assembly backwards and forwards, or from the side to side, for the proper alignment.

  1. Install the transmission front mount through bolt.

Tighten

Tighten the transmission front mount–to–transmission through bolt to 90 N•m (66 lb–ft).

More articles — Engine and Engine Aggregates