Home/Kia/Sephia/Kia Sephia I рестайлинг (1994-1998)/Repair manual/Testing & Diagnostics/DTC P0125: EXCESS TIME TO ENTER CLOSED LOOP

Contents

Section: Testing & Diagnostics

All sections

DTC P0125: EXCESS TIME TO ENTER CLOSED LOOP Kia Sephia I рестайлинг

Testing & Diagnostics ~103 words

Excess time to enter closed loop code may be set by

ECT sensor malfunction.
Thermostat malfunction.
Cooling fan malfunction.
Water pump malfunction.
Coolant passages clogged.
Coolant leaks.
Coolant level.

Check cooling fan system. Repair as needed. Go to next step.
Check ECT sensor. See ECT SENSOR in «SYSTEM/COMPONENT TESTS»(ref-25100) article. If sensor is bad, replace sensor. If sensor is okay, go to next step.
Check cooling system. Repair as needed. Go to next step.
Clear code. Test drive vehicle and recheck codes. If code returns, replace PCM. If code does not return, problem is intermittent.