How to Replace the Oxygen Sensor, Primary Opel Vivaro A

Remove

1. 1. Raise vehicle
2. 2. Disconnect harness (1) from oxygen sensor connector (2) • Release integral clip

3. 3. Remove oxygen sensor (1) from exhaust manifold, using Socket KM-6236 (2)

Install

4. 4. Install new oxygen sensor to exhaust manifold, using Socket KM-6236 • Apply grease to threads – see “Sealants, Lubricants and Locking Compounds”
5. 5. Connect harness (1) to oxygen sensor connector (2) • Secure integral clip

6. 6. Lower vehicle