Home ReviewsRefund
Home/Opel/Vivaro/Opel Vivaro A (2001-2011)/Repair manual/Fuel Injection Systems/How to Remove and Install the Engine Speed Sensor
Contents Wiring diagrams Section: Fuel Injection Systems All sections

How to Remove and Install the Engine Speed Sensor Opel Vivaro A

Fuel Injection Systems 1 illustration

1. Raise vehicle

2. Remove engine undershield from vehicle

3. Disconnect wiring harness connector from crankshaft impulse sensor

  • Release integral clip (1)

4. Remove crankshaft impulse sensor from transmission housing

  • Remove bolt (2)

5. Install crankshaft impulse sensor to transmission housing

  • Install bolt (2)

6. Connect wiring harness connector to crankshaft impulse sensor

  • Install integral clip (1)

7. Install engine undershield to vehicle

8. Lower vehicle

More articles — Engine and Engine Aggregates