Home ReviewsRefund
Home/Opel/Vivaro/Opel Vivaro A (2001-2011)/Repair manual/DOHC Diesel Engine/Special Tools, G9U 730 Engine
Contents Wiring diagrams Section: DOHC Diesel Engine All sections

Special Tools, G9U 730 Engine Opel Vivaro A

DOHC Diesel Engine 3 illustrations
KM-498-BFluid Pressure Gauge
To check engine oil pressure
KM-6203Positioning Pin
To position crankshaft with No.1 piston at top dead centre
KM-6204Locking Tool
To lock intake camshaft
KM-6205Locking/Measurement Tool
To lock exhaust camshaft and measure timing belt tension
KM-6206Oil Filter Wrench
To remove oil filter
KM-6210Engine Support
To support installed engine from below
KM-652Flywheel Holder
To lock flywheel
KM-812Pipe Spanner
To remove and install high pressure fuel pipes
KM-6207Gear Puller
To remove gear from high pressure pump
KM-6211Adapter Tool
To check compression in cylinder
KM-6404Adapter
To measure engine oil pressure. Used in conjunction with KM-498-B
KM-6298Seal Installer
To install the crankshaft oil seal on the timing side. Used in conjunction with KM-6424-3
KM-6300Seal Installer
To install camshaft oil seal (timing side). Used in conjunction with KM-6424-1
KM-6308Seal Installer
To install crankshaft oil seal (flywheel side)
KM-6424Seal Installer Kit
To install camshaft oil seal (timing side), intermediate shaft oil seal and crankshaft oil seal (timing side)
KM-6208Installer
To install cap to cover of high pressure pump gear
KM-6210-100Adapter Kit
For use with KM-6210, with subframe removed
KM-6212Remover
To remove fuel injectors
KM-6299Installer
To install intermediate shaft seal
KM-6403Flywheel Positioner
To align flywheel and crankshaft
KM-6404Oil Pressure Adapter
To check oil pressure. Used with KM-712-A and KM-498-B
KM-6422Adapter
To check low diesel fuel pressure. Used with KM-J-34730-91

More articles — Engine and Engine Aggregates