How to Replace the Engine Stabiliser, Lower Opel Vivaro A

Remove

1. 1. Raise vehicle
2. 2. Remove engine and transmission undershield from vehicle
3. 3. Remove lower engine stabiliser (1) from engine mount bracket and subframe • Remove 2x bolt (2)

Install

4. 4. Install new lower engine stabiliser to engine mount bracket and subframe • Install 2x bolt; do not tighten at this stage • Secure bolt (2) 100 Nm • Secure bolt (1) 280 Nm

5. 5. Install engine and transmission undershield to vehicle
6. 6. Lower vehicle