How to Replace the Engine Damping Block, Right Side Opel Vivaro A

Remove

1. 1. Raise vehicle
2. 2. Remove engine and transmission undershield from vehicle
3. 3. Install Engine Support KM-6210-A to vehicle – see operation “Engine Support KM-6210-A, Install and Remove”

4. 4. Lower vehicle
5. 5. Release power steering reservoir from front panel, then move to side • Release from integral clip

6. 6. Release harness (2) from engine damping block • Release from clip
7. 7. Release 2x fuel line (1) from engine mount • Release from 2x clip

8. 8. Release engine damping block (2) from engine mount • Remove bolt (1)
9. 9. Remove engine damping block from inner wing • Remove 3x bolt (3)

Install

10. 10. Install new engine damping block (2) to engine mount • Install bolt (1); do not tighten at this stage
11. 11. Install engine damping block to inner wing • Install 3x bolt (3); do not tighten at this stage
12. 12. Secure engine damping block to inner wing and engine mount • Secure bolt (1) 105 Nm • Secure bolt (3) 44 Nm

13. 13. Secure harness (2) to engine damping block • Secure to clip
14. 14. Secure 2x fuel line (1) to engine mount • Secure to 2x clip

15. 15. Secure power steering reservoir to front panel • Secure to integral clip
16. 16. Raise vehicle
17. 17. Remove Engine Support KM-6210-A from vehicle

18. 18. Install engine and transmission undershield to vehicle
19. 19. Lower vehicle