Remove
- 1. Open bonnet
- 2. Disconnect battery • Detach earth connection from earth terminal – Slacken nut
- 3. Raise vehicle by its full height
- 4. Detach the lower engine cover and right engine splash guard
- 5. Place collecting basin underneath.
- 6. Remove oil pressure switch (1) • Disconnect wiring harness plug (2)
Install
- 7. Install oil pressure switch • Tighten oil pressure switch 25 Nm • Fix wiring harness plug
- 8. Install lower engine cover and right engine splash guard
- 9. Lower vehicle by its full height
- 10. Connect battery • Attach ground connection to ground terminal – Tighten nut
- 11. Program volatile memories
- 12. Close bonnet