Home ReviewsRefund
Home/Honda/Civic/Honda Civic VIII рестайлинг (2008-2011)/Repair manual/Testing & Diagnostics/Fuel System & Emissions System (K20Z3 Engine): Maintenance
Contents Section: Testing & Diagnostics All sections

Fuel System & Emissions System (K20Z3 Engine): Maintenance Honda Civic VIII рестайлинг

Testing & Diagnostics 1 illustration ~140 words

ECM Reset

  1. Reset the ECM with the HDS while the engine is stopped.
  2. Turn the ignition switch to LOCK (0).
  3. Turn the ignition switch to ON (II), and wait 30 seconds.
  4. Turn the ignition switch to LOCK (0), and disconnect the HDS from the DLC.
  5. Do the ECM idle learn procedure (see «ECM IDLE LEARN PROCEDURE»(ref-255526-S39475388272007060300000) ).

Scheme 953

Scheme 953: Clear/Learn Procedure (with the HDS)
Scheme 953: Clear/Learn Procedure (with the HDS)
  1. Connect the HDS to the data link connector (DLC) (A) located under the driver's side of the dashboard.
  2. Turn the ignition switch to ON (II).
  3. Make sure the HDS communicates with the ECM and other vehicle systems. If it doesn't, go to the DLC circuit troubleshooting (see «MIL CIRCUIT TROUBLESHOOTING»(ref-355119-S12907777652010012000000) ).
  4. Select CRANK PATTERN in the ADJUSTMENT MENU with the HDS.
  5. Select CRANK PATTERN LEARNING with the HDS, and follow the screen prompts.

More articles — Fuel System & Emissions System (K20Z3 Engine)