Oil Pump Drive, Servicing Audi A8 D2

Note. Seals and gaskets should always be replaced. All of the components shown on the illustration can be removed and installed with the engine installed. Oil capacity when changing filter: 7.5 liters (approx. 8 qt.). Oil pressure switch and oil temperature sensor, checking: => Repair Manual, Electrical Equipment

The following list pertains to (Схема №106).

1. Oil seal Replacing, see «OIL PUMP DRIVE SEAL, REPLACING»(ref-196861-S24477937082005100900000)
2. Oil seal Replacing, see «CRANKSHAFT OIL SEALS, REPLACING»(ref-196861-S19247536352005100900000)
3. Oil pump drive
4. 10 Nm (89 in. lb)
5. 80 Nm (59 ft lb)
6. 35 Nm (26 ft lb)
7. 10 Nm (89 in. lb)
8. Circlips
9. Plug 35 Nm (26 ft lb)
10. Oil retention valves Replacing, see «OIL RETENTION VALVES, REPLACING»(ref-196861-S33348295472005100900000)