Component Layout, Engine Code Abz Audi A8 D2

Note. Always replace gaskets and seals.

The following list pertains to (Схема №103).

1. Oil pan, lower
2. 10 Nm (89 in. lb)
3. Oil pan, upper
4. 10 Nm (89 in. lb)
5. Honeycomb baffle
6. Circlip
7. Rubber fitting
8. Strainer
9. Oil pump Removing, see «OIL PUMP, REMOVING»(ref-196861-S21822823402005100900000) Replace as complete assembly only
10. 35 Nm (26 ft lb)
11. 25 Nm (18 ft lb)
12. 10 Nm (89 in. lb)
13. 25 Nm (18 ft lb)
14. 60 Nm (44 ft lb) plus additional 1/4 -turn (90°) Always replace Install with locking compound AMV 188 001 02
15. Spacer disc
16. Drive plate When assembling, make sure that pin for ignition timing point is installed in drive plate Length of pin measured from drive plate: 20-22 mm (approx. 13/16 in.)
17. Oil seal Replacing, see «REAR (TRANSMISSION END)»(ref-196861-S05092168192005100900000)
18. 10 Nm (89 in. lb)