Component Layout, Engine Code Aew Audi A8 D2

Note. Always replace gaskets and seals.

The following list pertains to (Схема №104).

1. Oil pan, lower
2. 10 Nm (89 in. lb)
3. Oil pan, upper
4. 10 Nm (89 in. lb)
5. Honeycomb baffle
6. Circlip
7. Rubber fitting
8. Strainer
9. Oil pump Removing, see «OIL PUMP, REMOVING»(ref-196861-S21822823402005100900000) Replace complete assembly only
10. 25 Nm
11. Baffle
12. 35 Nm (26 ft lb)
13. 25 Nm (18 ft lb)
14. 10 Nm (89 in. lb)
15. 25 Nm (18 ft lb)
16. 85 Nm (63 ft lb) Always replace Install with locking compound AMV 188 001 02
17. Disc
18. Drive plate When assembling, make sure that pin for ignition timing point is installed in drive plate Length of pin measured from drive plate: 20-22 mm (approx. 13/16 in.)
19. Oil seal Replacing, see «CRANKSHAFT OIL SEALS, REPLACING»(ref-196861-S19247536352005100900000)
20. 10 Nm (89 in. lb)