Home/Opel/Senator/Opel Senator B (1987-1993)/Repair manual/Fuel Injection Systems/F0: Data List - Test Step 14 Engine Load Sig.
Contents Section: Fuel Injection Systems All sections

F0: Data List - Test Step 14 Engine Load Sig. Opel Senator B

TestTECH 1NotesNominal ValuesPossible
StepDisplayTrouble
No.Codes
14ENGINE LOAD SIG.Engine idling, *44, 45
operating temperature
Model Year 881.7 to 2.8 ms
Model Year 891.6 to 2.8 ms

The engine load signal is composed of the following parts which have an influence on the value of the load signal.

If the measurement value deviates from the nominal values, the following trouble-shooting is to be carried out:

Test Step Checking of

No.

03 AIR FLOW SENSOR

05 IDLE CO POT.

10 ENGINE SPEED

If values are lower than the nominal values a check should be made for an air leak in area of intake manifold especially on the vacuum connections.

* All consumers switched off (AC, lighting, AT vehicles in P or N position).