Oil Circuit
Engine Oil Viscosity
The following engine oils can be used for petrol and diesel engines:
A = Single grade oils
B = Multi-grade oils
C = Easy run oils
depending on the outside temperature.
Engine Oil Quality
| It is important that the following API and CCMC classes be used: | |||
|---|---|---|---|
| .P. C9563.tif | 9 | 7,5 | tiff;; |
| Engines | Single and multi-grade oils | Easy run oils | |
| Petrol | API - SF/CC, SF/CD, |
SG/CC, SG/CD
| CCMC G-4 | API - SF/CC, SF/CD, |
SG/CD
| CCMC G-5 |
Important: Fill up all 6 -cylinder engines only with multi -grade or easy run oils.
Important!
CD engine oils designated by the manufacturer specially for diesel engines are not suitable for petrol engines if a sufficient performance class for petrol engines (e.g. API - SF/CCMC G 4) is not also indicated.
Observe the relevant national regulations when disposing of used oils.
Engine Oil Filling Quantities
Engine Initial filling* Filling quantity with filter change* MIN to MAX
(litres) (litres) (litres)
C 30 SE, C 30 SEJ, C 30 XEI 6.75 5.50 1.5
* To dipstick mark "MAX"
Oil Circuit C 30 SE, C 30 SEJ, C 30 XEI
Oil Pump
Tooth backlash in mm 0.15 ± 0.05
Projection of gears
over housing edge in mm 0.1 to 0.2
Oil pressure at 800 rpm
and 80° C oil temperature in bar 3.0 to 3.5
Oil pressure at 2000 rpm
and 90° C oil temperature in bar 4.5 to 5.0
Ribbed V -Belt C 30 SE, C 30 SEJ, C 30 XEI
Vehicles without AC:
Designation 6K 1460
Length in mm 1460
Vehicles with AC:
Designation 6K 2230
Length in mm 223