Remove
Remove cover (1) from oil filter housing with oil filter insert. Remove oil drain bolt on oil pan – place collecting basin underneath.
Install
Attach oil drain bolt to oil pan with new seal ring – tightening torque 10 Nm / 7.5 lbf. ft.
Slide new seal ring (2) onto oil filter housing cover. Attach oil filter housing cover with new oil filter insert (3) to oil filter housing – tightening torque 15 Nm / 11 lbf. ft. Charge with prescribed engine oil quantity.
Inspect
Start engine and allow to run until the oil pressure telltale extinguishes. Check engine oil level and correct if necessary.