Home/Opel/Corsa/Opel Corsa D (2007-2011)/Repair manual/Fuel Injection Systems/Replace Mixture Regulation Oxygen Sensor

Contents

Wiring diagrams Section: Fuel Injection Systems

All sections

Replace Mixture Regulation Oxygen Sensor Opel Corsa D

Fuel Injection Systems 1 illustration

Remove

1. Open bonnet
2. Remove engine cover
3. Remove mixture regulation oxygen sensor (1) from return manifold (2) • Disconnect wiring harness connector. • Unclip cable • Unscrew using KM-6129

Replace Mixture Regulation Oxygen Sensor

Install

4. Install mixture regulation oxygen sensor in return manifold • Apply special grease to thread • Tighten oxygen sensor 45 Nm • Use km-6129 • Connect wiring harness plug • Attach wiring harness
5. Install engine cover
6. Close bonnet