Home/Opel/Corsa/Opel Corsa D (2007-2011)/Repair manual/Fuel Injection Systems/Remove and Refit Drive Pedal Module

Contents

Wiring diagrams Section: Fuel Injection Systems

All sections

Remove and Refit Drive Pedal Module Opel Corsa D

Fuel Injection Systems 1 illustration

Remove

1. Open driver's door
2. Remove accelerator pedal (3) • Disconnect wiring harness plug (1) • Unscrew 2x bolts (2) • Remove accelerator module upward

Remove and Refit Drive Pedal Module

Install

3. Install accelerator pedal module • Insert accelerator pedal module • Tighten 2x bolts 12 Nm • Fix wiring harness plug
4. Close driver's door